From Schneider Electric this is the modular Harmony XB5 range of 22 mm diameter complete Potentiometers. The potentiometers have a modern ergonomic design giving you improved reliability for machines. Panels and processes. Easy to install, flexible, flush mounting, integrated resistor, hardwearing, cost effective suitable for all industrial applications. The Harmony XB5 Potentiometer range is an innovative, switch, control and signalling components.

Whilst this restriction does not legally apply to components, it is recognised that component “compliance” is relevant to many customers.

EU Directives 2011/65/EU and 2015/863 restrict the use of the 10 substances below in the manufacture of specified types of electrical equipment.

A potentiometer (Pot) works through the two terminals they have, are fixed to a resistive element or what we may refer to as a track. A third terminal is connected to the wiper, which is a sliding contact. As the wiper moves along the track, the resistance changes and the current that is flowing through the circuit changes

Known as "pots" or "potmeters"Screw terminals22mm panel cut-outThe bezels are comprised of chromium-plated metalFeaturing an IP rating of IP66 - this means that each potentiometer within this range is totally dust-tight, no dust can get into the electronics or the shaft this IP rating also means that the item has protection against direct high-pressure jetsCompatible with a Ø 6mm shaftComplete and ready to use Pot.Mechanically durable for up to 50000 cyclesEach potentiometer (Pot) features a knurled knob with white markingsStandards - EN/IEC 60947-1, UL 508, and CSA C22.2 No 14Made from cermet (heat resistant).Green Premium product.

RS Components has taken all reasonable steps to confirm this statement. Information relates only to products sold on or after the date of this certificate.

This statement confirms that the product detailed below complies with the specifications currently published in the RS media and has been subject to the strict quality conditions imposed by RS Components’ internal management systems. Furthermore and where applicable, it confirms that all relevant semiconductor devices have been handled and packed under conditions that meet the administrative and technical requirements of ANSI/ESD S20.20 and EN61340-5-1 electrostatics control standards.