Xenon lamp 300W Price

Their infrared and ultraviolet radiation can cause skin burns and eye damage. Please read the hazard table that comes with each bulb delivered.

PE300BFA Model 300W Cermax Xenon Lamp Used In Diagnostic And Surgical Endoscopes New And Original   About Cermax 300 watt Xenon Lamp   The Cermax® three hundred watt Xenon lamp is well known for its high brightness, extensive spectral radio and fixed radio, and has been an industry standard since its development. This 300 watt xenon lamp is used extensively in surgical and diagnostic hospitals around the world.     Reflector Type Parabolic Body Type Ceramic Total Visible Output 5000 Lumens Power - Nominal 300 Watts Power - Range 180-320 Watts Current - Nominal 21 Amps (DC) Current - Range 10-22 Amps (DC) Ignition Voltage 23-35 kilovolts (system dependent) Operating Voltage - Nominal 14 Volts (DC) Operating Voltage - Range 13-16 Volts (DC) Lifetime 1000 hours typical Temperature 150° C (maximum) Radiant Output 50 Watts UV Output (<390 nm) 2.6 Watts IR Output (>770 nm) 29 Watts   Pictures   Notes:   1. The lamp is within 45 degrees of the vertical, and the window cannot be used upwards. 2. The sealing temperature shall not exceed 150℃. 3. It is recommended to use current/power regulating ballast and Excelitas lamp holder. 4. The bulb must be used within the recommended current and wattage limits. Excessive power will cause the arc to be unstable and difficult to start And premature aging. 5. The hot mirror assembly can be used for infrared filtering. 6. Cermax® xenon lamps are safer than the corresponding quartz xenon arc lamps. But it is recommended to be cautious Practice when operating lights, because they are under high pressure, require high voltage, reach temperatures up to 200 °C, and Their infrared and ultraviolet radiation can cause skin burns and eye damage. Please read the hazard table that comes with each bulb delivered.   Mechanical Dimensions       Spectral Output     Key Features · High-intensity illumination—5000 Lumens · Power range of 180-320 Watts · 1000 hours life · Broad spectral range with 5900° Kelvin color temperature · Made in the U.S.A.     Applications ·   Medical and industrial fiber optic illuminators · Machine vision · Infrared and visible spotlights/beacons · Spectroscopy · Microscopy · UV Curing · Video projection · Solar simulation · Wafer inspection The Cermax PE300BFA xenon lamp has a built-in parabolic reflector, which can achieve very intense and focused emission of visible light and infrared radiation. With their internal reflector and solid ceramic body, Cermax® xenon lamps are the safest and most compact alternative to traditional quartz xenon lamps. This makes them ideal for applications requiring a high level of lighting control. It is recommended to use a power supply with current regulation or power regulation with an output ripple less than 5%. The use of a single ignition pulse is recommended as the HF starter can damage the internal reflector of the lamp.   If you have any interest in PE300BFA Model 300W Cermax Xenon Lamp Used In Diagnostic And Surgical Endoscopes New And Original ,pls don’t hesitate to contact us .Thank you .

Pe300bfaamazon

The Cermax® three hundred watt Xenon lamp is well known for its high brightness, extensive spectral radio and fixed radio, and has been an industry standard since its development. This 300 watt xenon lamp is used extensively in surgical and diagnostic hospitals around the world.

Cermax Xenon lamp 300w

4. The bulb must be used within the recommended current and wattage limits. Excessive power will cause the arc to be unstable and difficult to start

The Cermax PE300BFA xenon lamp has a built-in parabolic reflector, which can achieve very intense and focused emission of visible light and infrared radiation. With their internal reflector and solid ceramic body, Cermax® xenon lamps are the safest and most compact alternative to traditional quartz xenon lamps. This makes them ideal for applications requiring a high level of lighting control. It is recommended to use a power supply with current regulation or power regulation with an output ripple less than 5%. The use of a single ignition pulse is recommended as the HF starter can damage the internal reflector of the lamp.

We use cookies to improve user experience and analyze website traffic. By clicking “Accept“, you agree to our website's cookie use as described in our privacy policy.

PE175BFA datasheet

Practice when operating lights, because they are under high pressure, require high voltage, reach temperatures up to 200 °C, and

If you have any interest in PE300BFA Model 300W Cermax Xenon Lamp Used In Diagnostic And Surgical Endoscopes New And Original ,pls don’t hesitate to contact us .Thank you .