You’ll be able to tell that the Philips HeartStart defibrillator battery is functioning correctly and ready to be used by the flashing green light. The Philips HeartStart Onsite defibrillator AED will indicate when the battery is low by using both an audio alert (a chirp) and a visual alert (a flashing i button). It’s critical to leave the Philips HeartStart Onsite battery inside of its AED so that self-tests can be performed. The Philips AED battery M5070A should be put into its AED at least 5 years from the date of manufacture.

While you’re getting your replacement battery, check the expiration date on your Philips HeartStart Onsite FRx AED electrode pads. Shop for AED pads now!

M5070Abattery

The M5070A Philips AED Battery is designed for the Philips HeartStart Onsite AED (M5066A, M5067A, M5068A) and Philips HeartStart FRx AED (861304).

As you were browsing something about your browser made us think you were a bot. There are a few reasons this might happen:

M5066A battery

The Philips HeartStart FRx battery has a long life- it has a capacity of 4 hours. This means the M5070A defibrillator battery has an operating time of 4 hours or a minimum of 200 shocks. The shelf-life of the Philips AED battery M5070A is 5 years. When inserted into the Philips HeartStart Onsite AED the battery will remain on standby and has a 4-year warranty, guaranteeing at least 4 years of usable service.

Sudden Cardiac Arrest (SCA) is a risk for any person and in any setting. In case of an SCA medical emergency, be prepared with an operative AED (automated external defibrillator) and a working battery. The Philips AED REF M5070A is designed for the Philips HeartStart Onsite AED (M5066A, M5067A, M5068A) and Philips HeartStart FRx AED (861304). It’s highly suggested that a replacement battery be kept on hand next to your AED in case of a battery malfunction during an SCA event.

When a low battery is detected, the unit will start beeping and the status indicator will change from the ready-for-use state to a low battery state.