This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

FENCE for Hobart - Part# 00-290984It features a quick release thumbscrew, so you can easily tighten or loosen it00-290984This part can be used with a range of Hobart fence systemsFits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

THUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

Fits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

We carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

The first step in finding your driving position is adjusting your racing seat or whole cockpit because every other adjustment is predicated on the correct seat set-up. In the beginning, make sure that your seat is well attached to the sim rig. Obviously the best possible choice is a dedicated race seat or bucket seat, but if you don’t have those available, a simple fixed seat will do. Do not forget that you will get a better feel as to what the rear end of the car is doing if your body is firmly anchored to the seat.

Hi-Limit, Manual Reset - 450 Degree FThe PITCO High Limit Safety Thermostat with manual reset provides a positive temperature overtemperature protection device for heating appliances.This unique...

The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

CONTROLLER, QUANTEM TEMP for Vulcan - Part# 00-960903FENCE for Hobart - Part# 00-290984It features a quick release thumbscrew, so you can easily tighten or loosen it00-290984This part can be used...

It features a quick release thumbscrew, so you can easily tighten or loosen it00-290984This part can be used with a range of Hobart fence systemsFits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

FENCE for Hobart - Part# 00-290984It features a quick release thumbscrew, so you can easily tighten or loosen it00-290984This part can be used with a range of Hobart fence systemsFits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

The height of the center of the steering wheel should be near the base of the neck. This is, of course, much higher than in our street cars, but it is necessary to engage the larger muscles of the upper arms, shoulders and back to have better control of the car. Theposition you will want to take is a GT-style seating position, rather than an F1 seating position. This will be more comfortable for you and will allow for longer sessions.

We have done our best to provide some important details of setting up the correct GT-style position that will give you all the possible advantages during racing. In addition, our motion cockpits are designed to be able to provide drivers with a correct and ergonomic position behind the wheel without additional modifications. We hope that each of you will be able to find the perfect position and improve your performance both in virtual races and on the real track.

The GT style seating position. Basically, there are two categories of seat position in sim racing: GT (upright) and formula (reclined). GT seating position tends to be quite straight, perhaps even more vertical than your daily car, whereas formula seating positions emulating F1 are closer to 45 degrees. The position you decide on can be dictated by the capabilities of your cockpit or the type of race car you’re trying to simulate. Today we were talking about GT proper seating posture. So is there actually an ideal position for all drivers? Well, there is something very close to a perfect position that allows for comfort (which leads to less fatigue), leverage, bracing and good control of the vehicle in all types of driving conditions. If you take a look closer at a professional sports car race, you will see almost every driver using this same set-up. Let’s find out what is the correct position and how to set up and adjust the sim racing cockpit.

OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

Not as important as the other two, as it comes down to preference more than anything else, but make sure your legs aren’t too tight or too stretched to work the pedals effectively. The most important thing to note is to find what is most comfortable for you. Some racers prefer to have their legs a little more stretched out, while others prefer to have them a little more compressed. Be sure that you are able to press down on, as well as rest your feet on, the pedals.

This part can be used with a range of Hobart fence systemsFits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

CONTROLLER, QUANTEM TEMP for Vulcan - Part# 00-960903FENCE for Hobart - Part# 00-290984It features a quick release thumbscrew, so you can easily tighten or loosen it00-290984This part can be used with a range of Hobart fence systemsFits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

00-290984This part can be used with a range of Hobart fence systemsFits: HBL-20, HBL-24, HBL-26, HBL-28The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is available at AllPointsWe carry a wide variety of products including fencing and gates, hardware, tools and supplies, tools and tool accessories, hardware, fasteners and fittingsTHUMBSCREW - FENCE for Hobart - Part# 00-290984The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

ThermostatThe Thermostat® 6-Series line of two and four-zone commercial-quality thermostats includes many standard features to fit your varying needs. These full-featured thermostats include...

The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

The THUMBSCREW - FENCE for Hobart - Part# 00-290984 is the correct replacement part for Hobart models of the following series: 60, 90, 600OEM Part Number: 00029316This part is compatible with a Hobart model manufactured in 1997The THUMBSCREW - FENCE for Hobart Features: Thumbscrew fence rides on a 4" (102 mm) diameter rail Available in left- or right-hand mounts and sold in pairsThe THUMBSCREW - FENCE for Hobart - Part# 00-290984 is made of aluminum and can handle up to 1/2 inch wire

Your hand position on the steering wheel should be in the 9 and 3 o’clock positions, with the thumbs in contact with the 9 and 3 o’clock spokes of the wheel. This will give you more direct feedback from the front suspension in case of over or under-steering conditions. Your right hand will also be in a better position for reaching the gear shift lever and allows for a more natural movement when grabbing for that next gear. Locating your hands this way allows for more steering input in tight corners, without your forearms crossing over each other.

The easiest way to achieve the ideal distance from the steering wheel is to adjust your seat so that when you stretch your arms straight out, your wrists lie across the top of the steering wheel. Make sure your shoulders are touching the seat back. Once you place your hands on the wheel, your elbows will be bent at an approximate 90–100 degrees, which is ideal. Such an arrangement of the hands will allow you to drive the car with confidence, it will be less tiring for the muscles, which under the influence of changing track conditions and constant vibration of the engine get tired quite quickly.